Modern mothers use polystyrene foam in full swing. It is easy to cut with a regular stationery knife and therefore takes absolutely any shape. Now I suggest you find a chinese overseas canada data piece of polystyrene foam and make a body for the craft out of it.
Let’s take:
- polystyrene foam (any size),
- corrugat paper,
- hot gun,
- PVA glue,
- cones.
Take a rectangular or square piece of foam. Use a here’s why your consumer will buy knife to scrape off one side so that you get a sharp ge. This is our half-finish muzzle with a base.
We glue the workpiece with corrugat or toilet paper. For fixation, you can use regular safe PVA glue or hot glue from a thermal gun. Here is the base ready.
Then we put the cones on with hot glue.
By the way, it is convenient to stick decor into foam plastic. For this, dry leaves can be fix on a toothpick or wire and stuck directly into the body.
The eyes can be drawn or mold from plasticine. You philippines numbers also buy ready-made eyes in craft stores or cut them out of self-adhesive paper.
Hgehog idea made of pine cones and polystyrene with a rope
You can often see that topiary is made on the basis of round polystyrene balls. Now I will tell you how to make a hgehog on the basis of this blank. However, you can use polystyrene circles or polyurethane foam.
For decoration we will take twine or rope.
Let’s take:
- polystyrene foam ball,
- hot glue,
- a piece of foam plastic,
- a tourniquet or a string.
Let’s start by cutting the round blank in half. One hgehog will ne one half.
From a small piece of foam plastic we cut out a muzzle with a point ge. And with the help of hot glue we put it on one part of the semicircle.
We take the twine and start wrapping it around the nose. We secure the ends with hot glue.
The photo shows that the ge of the rope was coat with glue and fix to the bottom of the nose.
Once you have twist the entire face, cut the rope and secure this end. It is better to hide it from the bottom.
Now we turn the workpiece upside down and wrap the bottom. This should be done in a spiral.
We won’t touch your back.
After all, we glue cones onto it with hot glue.
We fix the nose and eyes. And the hgehog can already go to an exhibition at school or kindergarten.
Below I will tell you what other material can be us to create the base.
Simple hgehog made of pine cones and paper
Another simple option is to make a face out of cardboard or color paper.
Let’s take:
- a bump,
- hot glue,
- scotch,
- cardboard.
Let’s start with the basics. We ne to make a small cone out of cardboard.
To get the size right, you ne to measure the circumference of the cone. And make a circle of the same diameter on cardboard. Then cut out a quarter of it.
Look, in the picture you can clearly see that the sharper the triangle you cut out, the wider the workpiece will be.
We roll up our part and glue its sides with tape. Using hot glue, we fix it on the wide side of the cone. All that’s left is to decorate the craft and glue or draw a nose and eyes.
Crafts from a bottle, cup and natural material for school
A large hgehog can be made by using a bowl, saucepan or plate as the body.
Of course, we won’t take our mother’s new dishes, but we’ll look for some old ones. Such bowls are usually not thrown away by our grandmothers, but are carefully taken out into the yard. Bird food, chicken food or cat food is pour into them. In general, you understand what we ne.
Let’s take:
- 1.5 l plastic bottle,
- cup,
- paint,
- cones,
- hot glue,
- scissors.
Let’s start making the base. To do this, cut off the narrow part of the bottle, where the neck is. Then make small cuts (about 1 cm) along the diameter, we will glue them to the plate for better fixation.
We turn the bowl itself upside down and glue this plastic piece.
Or here.
If there is a primer, it is better to prime the entire part. This is done for uniformity and homogeneity of painting. However, you can immiately spray paint over the bowl.
Then we cover the entire bowl with pine cones.
We glue the nose and paint the lid black. We glue the eyes and think about the decor.
You can use dry leaves, rowan berries, roll a rose out of leaves, beads and ribbons.